FA Italy Gear Selector PX (Made In Italy)
- Product Code: 1388807
- Weight: 400g
- text_nostock
Rp475,000
Gearshift latches are an extremely important component when it comes to shifting precision and the durability of the gear shifting cross. If the detent is disengaged, the transmission tends to shift gears even though the gear has been engaged correctly. This can often be remedied by replacing the detent.
The early PX models up to 1984 still use a gearbox with a cranked shift paddle. Also the shift pin is still equipped with a washer between pin and shifting cross. Here the upper edge of the thrust block (rotatably mounted block on the detent arm) in the position of the third gear stands off approx. 1.5mm from the sealing surface of the shifting notch to the outside.
- LUSSO (1984-)
The models from year 1984 up use the so-called Lusso transmission with flat shifting pad type and shifting pin without washer between pin and shifting pad. Here the upper edge of the thrust block (rotatably mounted block on the ratchet arm) in the position of the third gear is parallel to the sealing surface of the shifting catch.
QUALITY
Note: Under the designation OEM quality we sell shifting catches of different manufacturers which meet our quality standards. Usually they are much better than new original Piaggio shifting gearshift pawls because Piaggio buys randomly in the Far East and packs for very expensive money quite a mess in their boxes.
TIP
The wear and tear of the gear shifting pawl is clearly visible when the cover is removed and when standing still (without running engine) it is tried to shift to another gear. If the detent arm (spring-loaded) clearly has play at its suspension, the detent should be replaced. If the gears still jump out under load, the shift pad and possibly the corresponding gearwheel should be changed.
(US)
By BrandFA Italia
-300x300.jpg "FA Italia Stand Feet Alumunium Vespa PTS Black")
By Category
-300x300.jpg "Stage6 Adaptor Lower Rear Shock Vespa PX Largefram...")
-300x300.jpg "Accossato Monoblock Forged Left 100mm Aqua Green C...")
-300x300.jpg "BGM Pro Gear Selector Fork Pawl Set Vespa PTS")
-300x300.jpg "SIP Performance Carburettor Casing CNC Black for P...")
-300x300.jpg "Accossato Monoblock Forged Left 100mm Nickel Calip...")
-300x300.jpg "BGM Pro Superstrong Clutch Cover Silver Vespa PX,S...")
-300x300.jpg "Casa Lambretta Clutch Spider Lambretta DL/GP")
-300x300.jpg "Accossato Brake Hose Vespa New PX Carbon Black (m...")
-300x300.jpg "Accossato Axial P4 CNC Left Black Caliper")
-300x300.jpg "Stage6 Adaptor Upper Rear Shock Vespa PTS ET3 Smal...")
-300x300.jpg "BGM Crankshaft Original Rotary Stroke 51mm, Conro...")
-300x300.jpg "Accossato Monoblock Forged Left 100mm Stabilo Gree...")
-300x300.jpg "Polini Clutch Cover for Vespa PX")
-300x300.jpg "Casa Lambretta Rear Sprocket Lightweight DL/GP 46 ...")
-300x300.jpg "Accossato Axial P4 CNC Left Nickel Caliper")
-300x300.jpg "BGM Crankshaft Pro Racing Rotary Stroke 51mm, Conr...")
-300x300.jpg "Accossato Monoblock Forged Left 100mm Red Caliper")
