Dellorto Carburator 19/19mm SHB Vespa PTS

Dellorto Carburator 19/19mm SHB Vespa PTS

Dilihat sebanyak 6573x

Product Code: 00773
00773
Weight: 640g
Dimension: 120mm x 100mm x 132mm
Stok produk kosong
Untuk sementara produk ini tidak dijual. Jangan kuatir, produk akan segera kami perbarui.
$121

Tag Produk:

dellorto carburator karburator polini italy italia shb vespa et3

Deskripsi Produk

The SHB series is the classic among scooter carburettors. On nearly every small frame this successful carburettor type was used.

The very easy to adjust carburettors are available with diameters up to 19mm. The passage is sufficiently dimensioned, in order to make also engines with 112 ccm sufficiently mixture available. Due to their very identical design, independent of the carburettor cross section, these carburettors are optimally suited to fit a larger version of the V50, PK50, for example, which are equipped with a 16mm carburettor as standard.

Attention: To a larger carburettor belongs inevitably also another intake manifold since the carburettors have another clamping width apart from another inside diameter.

Carburettors
size venturi:	19 mm
size main jet:	74
main jet type:	Dellorto 5mm (1486)
size pilot jet:	45
idle jet type:	Dellorto SH (3360)
size choke jet:	60
power jet:
size slide:	7938.1
slide type:	flat slide
choke type:	manual, cable
mounting type air filter:	with studs
connection size air filter:	51.5 mm
mounting type intake manifold:	clamp-connection
connection size intake manifold:	23.1 mm
idle gas screw:	on top
fuel/air mixture screw position:	right hand side
fuel hose position:	left hand side
connection size fuel hose:	7 mm
height:	122 mm
width:	80 mm
depth:	72 mm
connection height (relative):	44 mm
fitting type:	M6 x 0.75
material float chamber:	plastic
connector for oil hose:
vacuum connection:
OEM numbers (for comparison purposes only)
Piaggio	196228, 151976, E.4092, E4092
DellOrto	00773